Stoklu siparişleriniz aynı gün kargoda!

Deionized Water System Chemetrics

Fiyat Sorunuz

High-purity deionized water generation system producing Type I and Type III ultrapure water for laboratory applications

Dual output system: Type III and Type I deionized water production
Advanced reverse osmosis membrane with automated cleaning function
Microprocessor-controlled operation with touchscreen interface
Real-time water conductivity monitoring via digital display
Automatic water cycling system for maintained water quality
128 x 64 large LCD display with operational parameter readout
Automatic system diagnostics on startup with water/power failure alarm
Consumable replacement monitoring and notification system

Compare

Add to wishlist

Kargolama ve Teslimat

Kurye Teslimatı

Kuryemiz belirtilen adrese teslimat yapacaktır.

2-3 Gün

Ü.A. Kargo

Aras Kargo Teslimatı

Aras Kargo kuryesi belirtilen adrese teslimat yapacaktır.

1-3 Gün

Ücretsiz Kargo

Garanti 2 yıl

Daha fazla detay

14 Günlük ücretsiz iade

Daha fazla detay

The Chemetrics Deionized Water System is a microprocessor-controlled purification device designed for laboratory applications requiring high-quality deionized water. It produces Type III grade water (0-10 µs/cm) from Output 1 and Type I grade water (0.056 µs/cm, 18.25 MΩ.cm at 25°C) from Output 2, meeting stringent purity standards for analytical and biological research.

Technical Specifications

Type I Output Conductivity	0.056 µs/cm (18.25 MΩ.cm at 25°C)
Type III Output Conductivity	0-10 µs/cm
Inlet Water Requirement	Tap water
Inlet Water Pressure	1.0-5.0 kg/cm²
Reverse Osmosis Membrane Capacity	5-100 lt/hour
Pure Water Flow Rate	1.5 lt/minute
Silica Removal Rate	Si > 99.9%
Absorbance (254 nm, 1 cm path)	≤ 0.001
Dissolved Silicon (SiO₂)	< 0.01 ppm
Particulate Matter (>0.22 µm)	< 1/ml
Heavy Metal Content (ppm, max)	< 0.001
Total Organic Carbon (TOC)	< 6 ppb
Microbial Load (CFU/ml)	< 1 cfu/ml (254 nm)
Pyrogens (Endotoxin)	< 0.005 EU/ml
Membrane Filtration	0.22 µm
UV Sterilization Wavelength	254 nm
Power Supply	220V / 50 Hz
Voltage Fluctuation Tolerance	± 10%
Operating Temperature Range	5-40°C
Dimensions	460 × 480 × 500 mm

Applications

Bacterial and mammalian cell culture
Plant tissue culture and micropropagation
HPLC analysis (amino acids, penicillin assays, organic compound testing)
General immunological applications
Microbiological and microbial testing
Protein purification protocols
Protein analysis and characterization studies
Buffer solution and high-purity reagent preparation
Total Organic Carbon (TOC) analysis
Toxicity testing and environmental screening
Chromatography and analytical chemistry

Frequently Asked Questions

What is the difference between Type I and Type III water?

Type I water (18.25 MΩ.cm) is the highest purity grade, suitable for analytical HPLC, chromatography, and sensitive biological assays. Type III water (0-10 µs/cm) is suitable for general laboratory use, media preparation, and rinsing. This system produces both grades from separate outputs.

What is the water production capacity?

The reverse osmosis membrane capacity is 5-100 lt/hour, with a pure water flow rate of 1.5 lt/minute from the main output.

Does the system include UV sterilization?

Yes, the system features a 254 nm UV sterilization lamp to reduce microbial contamination to <1 cfu/ml, meeting requirements for sensitive applications.

What happens during water or power interruptions?

The system includes automatic alarm notifications for both water supply failures and power interruptions, protecting your applications from unexpected water quality changes.

How is water quality maintained during storage?

The microprocessor-controlled automatic water cycling system activates at timed intervals to circulate stored water, maintaining Type I water quality standards throughout the reservoir.

What maintenance is required?

The system monitors consumable filter cartridges and alerts users when replacement is needed. Reverse osmosis membrane cleaning is controlled via dedicated touchscreen button.

What inlet water quality is required?

Standard tap water is the inlet source. The system can accept tap water with inlet pressure of 1.0-5.0 kg/cm² for optimal RO membrane performance.