Sold out

'-40C Soğutmalı Sirkülasyonlu Su Banyosu JSR Marka JSRC Model

JSR JSRC Series -40°C Cooled/Heated Circulating Water Bath - Image 2

JSR JSRC Series -40°C Cooled/Heated Circulating Water Bath - Image 3

Stoklu siparişleriniz aynı gün kargoda!

JSR JSRC Series -40°C Cooled/Heated Circulating Water Bath

Fiyat Sorunuz

7-30 liter capacity options, operating range -40°C to 120°C. Cooled-heated recirculating bath suitable for laboratory use in specimen stabilization, viscosity measurements, and low-temperature testing applications.

Wide temperature range: -40°C to 120°C
Four capacity options: 7L, 11L, 20L, 30L
JSC-0D digital PID controller with ±0.1°C accuracy (at 37.0°C)
Class A Pt-100 sensor for precise temperature monitoring
Stainless steel immersion circulation pump
Overheat, overcurrent, and low-water-level safety cutoffs

Compare

Add to wishlist

Kargolama ve Teslimat

Kurye Teslimatı

Kuryemiz belirtilen adrese teslimat yapacaktır.

2-3 Gün

Ü.A. Kargo

Aras Kargo Teslimatı

Aras Kargo kuryesi belirtilen adrese teslimat yapacaktır.

1-3 Gün

Ücretsiz Kargo

Garanti 2 yıl

Daha fazla detay

14 Günlük ücretsiz iade

Daha fazla detay

The JSR JSRC series is a cooled and heated recirculating water bath offering a wide operating temperature range from -40°C to 120°C. Four capacity variants are available: JSRC-06CL (7L), JSRC-13CL (11L), JSRC-22CL (20L), and JSRC-30CL (30L), allowing selection based on laboratory capacity requirements.

The unit employs CFC-free air-cooled compressor for cooling and immersion direct heating element for heating functions. A stainless steel immersion circulation pump enables both internal bath and external recirculation capability. With JSC-0D digital PID controller and Class A Pt-100 temperature sensor, the bath delivers ±0.1°C accuracy (at 37.0°C); uniformity of ±0.3°C maintains consistent specimen temperature control.

The cabinet features epoxy powder-coated steel construction, while the bath tank and cover are fabricated from seamless stainless steel 304 with electro-polishing. Overheat, overcurrent, and low-water-level cutoff safety functions ensure safe operation. Preferred for viscosity measurement, material testing standards, calibration bath applications, and low-temperature endurance testing.

Technical Specifications

Model Options	JSRC-06CL, JSRC-13CL, JSRC-22CL, JSRC-30CL
Bath Capacity	7L / 11L / 20L / 30L
Temperature Range	-40°C to 120°C
Accuracy (at 37.0°C)	± 0.1°C
Uniformity (at 37.0°C)	± 0.3°C
Heater Capacity	700W / 800W / 1.2kW / 1.6kW
Cooling System	CFC-Free Air-Cooled Compressor
Circulation	Stainless Steel Immersion Circulation Pump
Controller	JSC-0D Digital PID Controller, LED Display
Sensor	Class A Pt-100 Ω
Safety Systems	Overheat, overcurrent, low-water-level cutoff
Cabinet Material	Epoxy Powder-Coated Steel
Bath/Cover Material	Stainless Steel 304 (seamless, electro-polished)
Inlet/Outlet Connection	∅9 mm tubing port
Electrical	220V ±10% AC, 50/60Hz, Single Phase
Plug Configuration	CEE 7/7 Schuko or BS 1363
Power Rating	6.7A / 8.0A / 9.8A / 11.6A